Kärcher B 40 C Bp Quick Start

QUICKSTART
5.965-085.0 07/13
Finish operation
1
A
D
B
E
C
F
Shutting Down the Appliance
A Close the regulatory button for setting the wa-
ter quantity.
B Set the program selection switch to suction or
vacuuming.
Drive the appliance forward for another 1-2 m
to draw off residual water.
C Lift the cleaning head.
D Release the safety switch.
E Raise the vacuum bar.
F Set the programme selector switch to "OFF".
2
A B
C
Emptying the Dirt Water Reservoir
몇 Warning
Please observe the local provisions regarding the
wastewater treatment.
A Take the water discharge hose from the sup-
port and lower above a suited collection de-
vice.
Squeeze or kink the suction hose coupling
sleeve.
Open wastewater hose cover.
Drain off the dirt water - regulate the water
quantity by pressing or bending.
B Rinse the wastewater reservoir with clean
water or with the rinsing system for the
wastewater reservoir (option).
C Leave the cover open to let it dry.
or
Press the lock of the wastewater reservoir in
and close the cover of the wastewater reser-
voir so that a gap remains open to facilitate
drying.
3
A B Emptying the Fresh Water Tank
몇 Warning
Please observe the local provisions regarding the
wastewater treatment.
A Loosen the lid for emptying the fresh
water - do not remove it fully. Drain water.
B To rinse the fresh water reservoir, remove the
cover completely and remove the fresh water
filter.
Check fresh water filter; clean if required.

Kärcher B 40 C Bp Specifications

General

Brand	Kärcher
Model	B 40 C Bp
Category	Scrubber
Language	English