10
4.1 High Pressure Operation
• Switch on the pressure washer (No.4)
• Ensure the Spray Lance with the Four–Way Nozzle (No.14) is attached
securely to the Spray Gun (No.12) and the nozzle is set to the required jet.
• Aim the lance towards the object to be cleaned making sure the
recommended working distance is used (for reference see Page 9).
Release the Safety Lock Device (No.13) on the Spray Gun and
squeeze the lever.
The pressurised water jet alone is capable of fulfiling most
cleaning tasks around the garden or on building work but
detergent and wash brush are advantageous when cleaning
vehicles or other paint finishes.
4.2 Low Pressure Operation without Brush
• Fill the Detergent Tank (No.5) with the selected detergent,
ensuring it is the correct concentration (See Page 8 or read
recommended dosage on label)
or
Dilute the detergent to the required concentration before filling the
Detergent Tank. (The correct dilution is dependent on the degree of
soiling of surface and is best determined by experience).
• Set the Four–Way Nozzle to the Low Pressure Jet (
).
Always ensure the Spray Gun is closed before changing
the nozzle setting
• Set the Dosing Ring on the Detergent Suction Tube
(No.5) to the desired dosage.
• Switch on the pressure washer (No.4)
• Aim the nozzle towards the object to be cleaned,
release the Safety Locking Device on the Spray Gun
and squeeze the lever to apply the detergent to the
working area.
To Next Page
Loading...
