27
SYMBOLS
Labels on your tools and in the manual may show symbols. Symbols represent
important information about the product or instructions for use.
Indicates a possible risk of injury.
Double insulated construction.
Do not expose to rain or use in humid places.
To reduce the risk of injury, the user must read and understand the original
instruction manual before using this product.
Always wear safety glasses or protective glasses with side shields and, if
necessary, a full face shield when using this product.
Use a respirator or mask whenever there is a possibility of inhaling
vapors.
To reduce the risk of accident or injury, never direct a stream of water at
people or animals or place any part of your body in the stream.
Leaking hoses or connections can also cause high-pressure injection injuries.
Never hold onto leaking hoses or connections.
To reduce the risk of injury from kickback, hold the spray wand firmly with
both hands when the machine is turned on.
If not used in dry conditions and safety practices are not followed, electric
shock could occur.
Warning! Never point the gun at people, animals, the body of the machine,
power supplies or any other electrical equipment.
The machine has not been designed to connect to potable water pipes.
Electrical products waste should not be thrown into household waste
bins. Recycle them where facilities are available. Consult your local
authorities or your dealer for recycling instructions.
Recycle unwanted materials instead of throwing them away as trash. All
tools, hoses and packaging must be sorted, taken to the local recycling
center and disposed of in an environmentally safe way.
To Next Page
Loading...
