To Next PageTo Next PageWhy is my Kärcher Vacuum Cleaner suction too low?
If the suction of your Kärcher Vacuum Cleaner is too low, try these steps: * Replace the paper filter bag. * Check for blockages in the suction hose or suction channel and clean them if necessary.
What to do if suction turbine does not run in my Kärcher Vacuum Cleaner?
If the suction turbine isn't running in your Kärcher Vacuum Cleaner, check or replace the pressure switch and the suction turbine. Also, inspect the cable connections and repair any defects.
What to do if my Kärcher Vacuum Cleaner appliance cannot be started?
If your Kärcher Vacuum Cleaner won't start, ensure it's properly connected to the mains. Check the mains connection cable for any damage and replace it if needed. You may also need to check or replace the startup capacitor, the startup capacitor electronics, or the switch for the brush drive.
What to do if my Kärcher CV 66/2 has an insufficient cleaning result?
If your Kärcher Vacuum Cleaner isn't cleaning well enough, check the brush rollers for any foreign objects. Also, inspect the suction hose and suction channel for blockages and clean them if needed. Replacing the paper filter bag can also help. You might also need to check or replace the toothed belt.
General| Air Flow Rate | 48 l/s |
|---|---|
| Container Capacity | 30 L |
| Weight | 13.5 kg |
| Voltage | 220 - 240 V |
| Hose length | 2.5 m |
| Frequency | 50 - 60 Hz |
| Dimensions (L x W x H) | 880 x 540 x 1250 mm |
| Dimensions (L × W × H) | 880 x 540 x 1250 mm |
