Kärcher FP 222 User Manual

10
English Vacuum polisher
Guarantee
The terms of the guarantee that is applicable in each country have been
published by our respective national distributors. Any fault that occurs
with your appliance during the guarantee period will be repaired free of
charge, provided that it has been caused by a material or
manufacturing defect.
Guarantee claims should be addressed to your dealer or the nearest
authorized customer service depot, and supported by documentary
evidence of purchase.
Making the unit operational
Before using the unit, remove the securing device provided to protect
the unit during transport. Pull or carefully knock off the plastic strip on
the underside of the unit.
Proper Use
The unit is used for polishing parquet floors, linoleum, stone floors, etc.
This machine has been developed for private use and is not designed
for the demands of industrial use.
The unit is supplied with three types of brushes:
1. One set of brushes with hard bristles – white
2. One set of brushes with soft bristles – black
3. One set of felt discs
Attaching the handle
Push the two pipes and the handle together, ensuring that the spherical
couplings have locked into position correctly.
Push the lower pipe end (with hole) into the base body of the unit. The
fitting position is correct when the ribbing on the handle points
forwards. Secure the connection by pushing the screw through the hole
and attaching the nut.
Attaching the dust bag
Push the nozzle situated on the underside of the dust bag into the
designated rectangular opening on the rear of the unit. The catch must
be pointing upwards and lock into position.
Then hook the spring to the top of the handle.
Inserting the filter bag
Unzip the fabric bag. Insert the filter bag and push the piece of
cardboard with the opening over the nozzle. Recheck the position of the
filter bag and then zip up the fabric bag.
Change the filter bag at regular intervals. This ensures that the unit will
operate at full power. (Order no. 6.904-128 – 3 ea.).

Kärcher FP 222 Specifications

General

Power requirements	230V, 50Hz
Product type	Floor polisher
Product color	Black, Blue, White
Dust bag capacity	4 L

Weight and Dimensions

Width	350 mm
Height	1000 mm
Weight	8300 g