8
WORKING WITH DETERGENTS
Detergents can only be applied in the
low setting.
Step 1
Set the spray wand to the low pressure (-)
position.
Step 2
Adjust the filter end of the detergent tube
for light ( / 0.13 gpm),
or maximum (+ / 0.18 gpm)
detergent coverage.
Step 3
Fill a container with Kärcher detergent.
Place the filter end of detergent suction tube
into the container.
Step 4
With the engine running, pull trigger to
operate unit: Liquid detergent is drawn into
the unit and mixed with water. Apply
detergent to work area. Do not allow
detergent to dry on surface.
Caution Never use:
• Bleach, Chlorine products and
other corrosive chemicals.
• Liquids containing solvents
(i.e., paint thinners, gasoline, oils).
• Tri-sodium phosphate products.
• Ammonia products.
• Acid-based products.
These chemicals will harm the unit
and will damage the surface being
cleaned.
For best results see Cleaning Tips on
pages 10 & 11 for specific information
on how to clean different surfaces.
Always Use Kärcher
Detergents for Best Results.
Kärcher biodegradable detergents are
specially formulated to protect the
environment and your pressure washer.
Special formula wont clog the suction tube
filter and will protect the internal parts of the
pressure washer for a longer life. For Kär-
cher Detergents, check your retailer
or call our service center for help.
The following Kärcher detergents are
available in USA / Mexico:
All Purpose and Vehicle Wash
Exterior House Cleaner
Deck & Patio Cleaner
Heavy Duty Degreaser
The following Kärcher detergents are
available in Canada:
Vehicle Wash
Pressure Wash
Deck + Fence Wash
Degreaser
To Next Page
Loading...
Need help?
General
