EasyManuals Logo

Kärcher G 3000 Operator's Manual

Kärcher G 3000
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
12 English
Cleaning Procedure:
Position the tip of the wand 6-8”
(15-20 cm) away from the surface to
clean at a 45°angle.
The color-coded quick connect
nozzles provide a wide array of spray
widths from 0° to 65° and are easily
accessible when placed in the
convenient nozzle holder.
0° spray angle = Red nozzle
For particularly stubborn accumulation
of grime. Not recommended for soft
materials like sidings, decks, painted
surfaces, cars.
15° spray angle = Yellow nozzle
For dirt accumulation over a surface.
25° spray angle = Green nozzle
For dirt accumulation over a large
surface.
40° spray angle = White nozzle
For moderate dirt accumulation over a
large surface.
Soap = Black nozzle
For operating with detergents or
cleaning with low pressure.
High pressure in nozzle area. Risk of
injury caused by improperly locked
nozzle.
Make sure you hear the "click" when
inserting the nozzle tip into the quick
connection.
Pull the nozzle to make sure it is
seated properly before operating your
unit.
To avoid serious injury never point
spray nozzle at yourself, other
persons or animals.
The pressure can be adjusted by
changing the speed of the engine
using the throttle lever.
Turning the throttle lever to the left can
increase the speed to get more
pressure.
Using the Accessories
Quick Connect Nozzles
Adjusting Water Pressure

Other manuals for Kärcher G 3000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kärcher G 3000 and is the answer not in the manual?

Kärcher G 3000 Specifications

General IconGeneral
Power1.4 kW
Flow Rate420 l/h
Engine Displacement196cc
Water Flow420 l/h
Motor Power1.4 kW

Related product manuals