To Next PageTo Next Page
Need help?Do you have a question about the Kärcher HDS 10/20-4 M and is the answer not in the manual?
General| Cable length | 5 m |
|---|---|
| Fuel tank capacity | 25 L |
| Connected load | 7800 W |
| AC input voltage | 420 V |
| Number of phases | 3 |
| AC input frequency | 50 Hz |
| Working pressure (max) | 200 bar |
| Working pressure (min) | 30 bar |
| Heating oil/gas consumption (full load) | 6.4 kg/h |
Weight and Dimensions| Depth | 750 mm |
|---|---|
| Width | 1330 mm |
| Height | 1060 mm |
| Weight | 171000 g |
Explains symbols displayed on the appliance for operation and safety.
Lists and identifies all external parts and features of the machine.
Details the built-in safety features and their functions.
Instructions for safely adding fuel to the appliance.
Guidance on adding detergent for cleaning operations.
Steps for connecting the appliance to a water source.
Procedure for drawing water from an external container.
Overview of different operational modes available for the machine.
How to set the desired water temperature for cleaning.
Adjusting the pump's pressure and water flow.
Guidance on using detergents effectively and safely.
Step-by-step instructions for efficient cleaning tasks.
Procedures to follow after using detergent.
Safely shutting down the machine after use.
How to protect the appliance from frost damage.
Steps for preparing the appliance for longer breaks or storage.
Steps for changing the lubricating oil.
Information on approved accessories and replacement parts.
Declared sound power levels for the machine models.
List of EU standards the product conforms to.
