To Next PageTo Next Page
Need help?Do you have a question about the Kärcher HDS 7/12-4 M and is the answer not in the manual?
General| Cable length | 5 m |
|---|---|
| Fuel tank capacity | 25 L |
| Connected load | 3400 W |
| AC input voltage | 230 V |
| Number of phases | 1 |
| AC input frequency | 50 Hz |
| Working pressure (max) | 120 bar |
| Working pressure (min) | 30 bar |
| Heating oil/gas consumption (full load) | 4.6 kg/h |
Weight and Dimensions| Depth | 750 mm |
|---|---|
| Width | 1330 mm |
| Height | 1060 mm |
| Weight | 146000 g |
Immediate danger that can cause severe injury or even death.
Possible hazardous situation that could lead to severe injury or even death.
Possible hazardous situation that could lead to mild injury to persons or damage to property.
Lists and describes the appliance's components for identification.
Identifies and explains the function of the appliance's control panel elements.
Explains color coding, machine symbols, and their meanings.
Outlines correct usage and specific safety instructions for operation.
Describes protective features like overflow valves, safety valves, and safeguards.
Instructions on how to correctly attach the handle to the appliance.
Guide to refilling system care and adjusting dosage based on water hardness.
Instructions for safely refilling the fuel tank.
Instructions for safely refilling the detergent tank.
Guide to connecting the hand spray gun, jet pipe, and nozzle.
Instructions for installing the high-pressure hose on different models.
Steps for connecting the appliance to a water supply tap.
Procedure for drawing water from an external vessel or container.
Guidelines for electrical supply connection and water source precautions.
Essential safety instructions for operating the appliance and replacing parts.
Explanation of the various operating modes for different cleaning tasks.
Steps for turning on the appliance and initial checks.
How to adjust cleaning temperature, working pressure, and flow rate.
Guidelines for using detergent economically and selecting the right type.
Step-by-step instructions for effective cleaning using the appliance.
How to operate the appliance using cold water for cleaning.
Guidelines for eco operation, hot water, and steam cleaning.
Specific safety measures required when operating with steam.
Steps to follow after using detergent, including rinsing.
Complete instructions for safely shutting down and disconnecting the appliance.
Procedures for storing the appliance, including frost protection measures.
Instructions and precautions for safely transporting the appliance.
Steps for shutting down the appliance, including draining and anti-freeze.
Overview of recommended maintenance tasks based on operating hours and time.
Detailed instructions for cleaning filters, sieves, and performing oil changes.
Explains the meaning of blinking indicator lamps for the pump.
Explains indicator lamps for rotational direction and appliance readiness.
Interprets blinking patterns for engine and burner malfunction indicators.
Explains indicators for service, fuel levels, and system care status.
Explains indicator lamps related to detergent tank levels.
Addresses issues with detergent pickup and appliance not running due to no power.
Explains common reasons and solutions for the device not building up pressure.
Solutions for leaks from the device bottom and unexpected on/off cycling.
Troubleshooting for burner start failures and inability to reach set temperatures.
Emphasizes using only manufacturer-approved accessories and spare parts.
Declares compliance with EU directives and lists relevant standards and sound levels.
Details electrical supply voltage, current, and water connection requirements.
Provides data on water flow, operating pressure, noise levels, vibration, fuel, dimensions, weights.
Details electrical supply voltage, current, and water connection requirements.
Provides data on water flow, operating pressure, noise levels, vibration, fuel, dimensions, weights.
Notes on testing frequencies and a table for recording test results.
