Need help?Do you have a question about the Kärcher HDS Super M Eco and is the answer not in the manual?
Ensures unit, piping, and hoses are in perfect working order before initial operation.
Instructions for checking and topping up engine oil to the MAX mark.
Guide for filling scale inhibitor to prevent heating coil calcification with hard water.
Instructions for installing handgun, hose reel, and high-pressure hose.
Details on connecting the water supply hose and drawing water from a tank.
Guidelines for connecting the unit to mains power, including impedance requirements.
Steps for switching on the machine, checking indicator lamps, and temperature settings.
Advice on potential circulatory issues from vibration and how to prevent them.
Adjusting the temperature regulator for hot water or steam cleaning.
How to set operating pressure and flow rate using the control spindle.
Properly measuring and using cleaning agents for environmental protection.
Recommended applications and safety in hazardous environments like petrol stations.
Selection of appropriate nozzles for different dirt types and surfaces.
Steps for applying cleaning agent and removing dirt with the high-pressure jet.
Instructions and safety warnings for operating with hot water and steam.
Detailed steps for safely shutting down the unit and disconnecting power.
Cooling down the unit and flushing if used with hot water or steam.
Notes on draining the unit to prevent frost damage and proper storage.
Procedures for draining water and flushing with antifreeze for non-use or frost protection.
Recommended checks and tasks to be performed weekly, monthly, and after 500 hours.
Instructions for cleaning strainers and fine filters as part of routine maintenance.
Steps to clean the strainer in the low water protection system.
Procedure to clean the filter in the cleaning agent suction hose.
Instructions for draining, filling, and checking engine oil levels.
Diagnosing and resolving problems related to the unit not building up pressure.
Troubleshooting why the unit fails to draw in cleaning agent.
Identifying and fixing issues where the burner does not ignite.
Resolving problems where the unit fails to reach the set working temperature.
Details on warranty terms, conditions, and claiming procedures.
Overview of safety systems like overflow valve, safety valve, and low water protection.
Information on voltage drops during start-up and mains impedance requirements.
Ensures unit, piping, and hoses are in perfect working order before initial operation.
Instructions for checking and topping up engine oil to the MAX mark.
Guide for filling scale inhibitor to prevent heating coil calcification with hard water.
Instructions for installing handgun, hose reel, and high-pressure hose.
Details on connecting the water supply hose and drawing water from a tank.
Guidelines for connecting the unit to mains power, including impedance requirements.
Steps for switching on the machine, checking indicator lamps, and temperature settings.
Advice on potential circulatory issues from vibration and how to prevent them.
Adjusting the temperature regulator for hot water or steam cleaning.
How to set operating pressure and flow rate using the control spindle.
Properly measuring and using cleaning agents for environmental protection.
Recommended applications and safety in hazardous environments like petrol stations.
Selection of appropriate nozzles for different dirt types and surfaces.
Steps for applying cleaning agent and removing dirt with the high-pressure jet.
Instructions and safety warnings for operating with hot water and steam.
Detailed steps for safely shutting down the unit and disconnecting power.
Cooling down the unit and flushing if used with hot water or steam.
Notes on draining the unit to prevent frost damage and proper storage.
Procedures for draining water and flushing with antifreeze for non-use or frost protection.
Recommended checks and tasks to be performed weekly, monthly, and after 500 hours.
Instructions for cleaning strainers and fine filters as part of routine maintenance.
Steps to clean the strainer in the low water protection system.
Procedure to clean the filter in the cleaning agent suction hose.
Instructions for draining, filling, and checking engine oil levels.
Diagnosing and resolving problems related to the unit not building up pressure.
Troubleshooting why the unit fails to draw in cleaning agent.
Identifying and fixing issues where the burner does not ignite.
Resolving problems where the unit fails to reach the set working temperature.
Details on warranty terms, conditions, and claiming procedures.
Overview of safety systems like overflow valve, safety valve, and low water protection.
Information on voltage drops during start-up and mains impedance requirements.
General| Brand | Kärcher |
|---|---|
| Model | HDS Super M Eco |
| Category | Pressure Washer |
| Language | English |
To Next Page
