Need help?Do you have a question about the Kärcher HDS 655 M Eco and is the answer not in the manual?
Guidance on responsible disposal of packaging and scrapped units.
Diagram identifying all parts and components of the pressure washer.
Identification and description of the unit's various controls and indicators.
Procedure for checking and topping up the engine oil.
Instructions for safely adding fuel to the unit.
How to fill the scale inhibitor reservoir.
Guidance on adding cleaning agent to the unit.
Steps for connecting the handgun and high-pressure hose.
Connecting the supply hose to the unit's water inlet.
Procedure for suctioning water from an open container.
Connecting the unit to the electrical power supply.
Procedures for starting the unit and initial operation.
Adjusting the temperature for hot water or steam cleaning.
Adjusting pressure and flow controls for cleaning.
Guidance on selecting the correct nozzle for cleaning tasks.
Instructions for using the unit with hot water.
Procedures and safety for steam operation.
Steps for cooling and flushing the unit after use.
Safe procedure for shutting down and disconnecting the unit.
Procedures for long-term storage or frost protection.
Schedule for routine checks and servicing.
Instructions for cleaning strainers and the cleaning-agent filter.
Procedure for draining and refilling the unit's oil.
Diagnosing and resolving issues with pressure build-up.
Fixing problems with the cleaning agent suction system.
Troubleshooting common causes for burner ignition failure.
Diagnosing issues when the unit fails to reach set temperature.
Details on warranty terms, conditions, and claims process.
Explanation of protective features like overflow and safety valves.
Notes on startup procedures and potential voltage effects.
Statement of compliance with relevant EC directives and standards.
Guidance on responsible disposal of packaging and scrapped units.
Diagram identifying all parts and components of the pressure washer.
Identification and description of the unit's various controls and indicators.
Procedure for checking and topping up the engine oil.
Instructions for safely adding fuel to the unit.
How to fill the scale inhibitor reservoir.
Guidance on adding cleaning agent to the unit.
Steps for connecting the handgun and high-pressure hose.
Connecting the supply hose to the unit's water inlet.
Procedure for suctioning water from an open container.
Connecting the unit to the electrical power supply.
Procedures for starting the unit and initial operation.
Adjusting the temperature for hot water or steam cleaning.
Adjusting pressure and flow controls for cleaning.
Guidance on selecting the correct nozzle for cleaning tasks.
Instructions for using the unit with hot water.
Procedures and safety for steam operation.
Steps for cooling and flushing the unit after use.
Safe procedure for shutting down and disconnecting the unit.
Procedures for long-term storage or frost protection.
Schedule for routine checks and servicing.
Instructions for cleaning strainers and the cleaning-agent filter.
Procedure for draining and refilling the unit's oil.
Diagnosing and resolving issues with pressure build-up.
Fixing problems with the cleaning agent suction system.
Troubleshooting common causes for burner ignition failure.
Diagnosing issues when the unit fails to reach set temperature.
Details on warranty terms, conditions, and claims process.
Explanation of protective features like overflow and safety valves.
Notes on startup procedures and potential voltage effects.
Statement of compliance with relevant EC directives and standards.
General| Operating Pressure | 150 bar |
|---|---|
| Fuel Tank | 20 l |
| Voltage | 400 V |
| Frequency | 50 Hz |
| Hose Length | 10 m |
To Next Page
