OPERATING INSTRUCTIONS
4
Step1 Connect the high pressure hose to the
unit’s high pressure outlet.
Step3 Connect garden hose
to unit’s water inlet.
Step4 Connect garden hose
to the cold water source and turn water
on completely.
Step5
Plug the power cord into the power out-
let. Trigger the gun to eliminate trapped air, wait
for a steady flow of water to emerge from the
spray nozzle.
Step6
Turn on the pressure
washer (I). The motor starts only if
the trigger of the gun is pulled and
shuts off when the trigger is released.
Step2 Insert the spray wand of your
choice into the spray wand
extension. Push in and turn clockwise
to lock spray wand in place.
To Next Page
Loading...
Need help?
General
