14 English
Storage
몇 CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device
during storage.
Keep the device safe
1. Place the device on a level surface.
2. Disconnect the spray lance from the
high-pressure gun.
3. Press the disconnect button on the
high-pressure gun and disconnect
the high-pressure hose from the
high-pressure gun.
ATTENTION
Damage to the high-pressure hose
Damage to the high-pressure hose due
to incorrect direction of rotation
Observe the direction of rotation of the
hose reel when winding.
4. Stow the high-pressure hose on the
device.
5. Stow the mains connection and ac-
cessories on the device.
Before prolonged storage, observe ad-
ditional instructions, see chapter Care
and service.
Frost protection
ATTENTION
Risk of frost
Devices that are not completely emp-
tied can be destroyed by frost.
Fully empty the device and accessories.
Protect the device from frost.
The following must be met:
● The device is disconnected from the
water supply.
● The high-pressure gun is separated
from the high-pressure hose.
1. Switch on the device “I/ON”.
2. Wait a maximum of 1 minute until no
more water comes out of the high-
pressure hose.
3. Switch off the device.
4. Store the device with all accessories
in a frost-proof room.
Care and service
DANGER
Risk of electric shock
Injuries due to touching live parts
Switch off the device.
Remove the mains plug.
The device is maintenance-free, so it is
not necessary to carry out regular
maintenance work.
Clean the sieve in the water
connection
ATTENTION
Damaged sieve in the water connec-
tion
Damage to the device due to water
contamination
Check the sieve for damage before in-
serting it into the water connection.
If necessary, clean the sieve in the wa-
ter connection.
1. Remove the coupling from the water
connection.
2. Pull out the sieve with a pair of flat
pliers.
3. Clean the sieve under running water.
4. Insert the sieve into the water con-
nection.
To Next Page
Loading...
Need help?
General
