Kärcher K Mini User Manual

– 6
This high pressure cleaner is designed for domestic use
only.
– for cleaning machines, vehicles, buildings, tools,
facades, terraces, gardening tools, etc. by means
of a high-pressure water jet (if necessary, with ad-
ditional cleaning agents).
– with accessories, replacement parts and cleaning
agents approved by KÄRCHER. Please observe
the information accompanying the cleaning agents.
The scope of delivery of your appliance is illustrated on
the packaging. Check the contents of the appliance for
completeness when unpacking.
In the event of missing accessories or any transport
damage, please contact your dealer.
Illustrations on Page 2
1 Water connection with integrated sieve
2 Coupling element for water connection
3 Hose coupling
4 High pressure connection
5 Accessory compartment
6 Carrying handle
7 Mains cable with mains plug
8 Cable clip
9 Storage for mains cable
10 Appliance switch „0/OFF“ / „I/ON“
11 Trigger gun
12 Lock trigger gun
13 Clamp for high pressure hose
14 Spray lance extension
15 Safety cover
16 Spray lance with pressure regulation (Vario Power)
The working pressure can be continuously in-
creased from "SOFT" to "HARD". To adjust the
working pressure, release the trigger gun lever and
turn the spray lance to the desired position.
17 High pressure hose
Mount loose parts delivered with appliance prior to start-
up.
Illustrations on Page 3
Illustration
 Screw the coupling element to the water connec-
tion on the appliance.
Illustration
 Pull out the clamp for the high pressure hose from
the trigger gun.
Illustration
 Connect high pressure hose to trigger gun.
 Push the clamp in until it locks. Check the secure
connection by pulling on the high-pressure hose.
 Park the appliance on an even surface.
Illustration
 Connect the high pressure hose to the high pres-
sure connection of the appliance.
Check the secure connection by pulling on the high
pressure hose.
 Insert the mains plug into the socket.
For connection values, see type plate/technical data.
Observe regulations of water supplier.
ATTENTION
Impurities in the water can damage the high-pressure
pump and the accessories. For protection, the use of
the KÄRCHER water filter (optional accessory, order
no. 4.730-059) is recommended.
Illustration
 Screw the supplied hose coupling on to the end of
your water supply hose.
Note: The supply hose is not included.
 Attach the water supply hose to the coupling on the
water connection.
 Connect the water supply hose to the water supply.
 Completely open the water tap.
Proper use
Environmental protection
The packaging material can be recycled. Please
arrange for the environmentally appropriate dis-
posal of the packaging.
Old appliances contain valuable recyclable ma-
terials that should be recycled properly. Please
arrange for the environmentally appropriate dis-
posal of the old devices.
Cleaning operations which produce oily waste
water, e.g. engine washes, underbody washes,
may only be carried out using washing stations
equipped with an oil separator.
Description of the Appliance
* Additionally required
Water supply hose
– Minimum diameter, 1/2 inches (13 mm).
– Minimum length 7.5 m.
Assembly
Start up
Water supply
6 EN

Kärcher K Mini Specifications

General

Maximum flow rate	360 l/h
Working pressure (max)	110 bar
Working pressure (min)	20 bar
Maximum area performance	20 m²/h
Maximum input water temperature	40 °C
Form factor	Compact
Hose length	5 m
Power source	Electric
Water filter	Yes
Product color	Black, Yellow
Detergent tank	-
Pressure range	High-pressure
Connected load	1400 W
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Package height	5600 mm

Weight and Dimensions

Weight	3900 g