Kärcher RCV 5 User Manual

English 17
a Open the water reservoir lid.
b Fill the water reservoir.
c Close the water reservoir lid.
4. Push the water reservoir into posi-
tion until it audibly engages.
5. Dampen the wiper cloth under run-
ning water and wring out to remove
excess water.
6. Install the wiper cloth holder, see
chapter Installing the wiper cloth
holder.
7. Install the wiper cloth, see chapter
Installing the wiper cloth.
8. Press the On / Off button.
The cleaning robot starts cleaning.
Refilling water
1. Press any key.
The cleaning robot stops.
2. Remove the water reservoir, see
chapter Removing the water reser-
voir.
3. Fill with water.
a Open the water reservoir lid.
b Fill the water reservoir.
c Close the water reservoir lid.
4. Push the water reservoir horizontally
into the cleaning robot until it audibly
engages.
5. Press the On / Off button.
The cleaning process continues.
Draining the water reservoir
1. Press any key.
The cleaning robot stops.
2. Remove the water reservoir, see
chapter Removing the water reser-
voir.
3. Open the water reservoir lid.
4. Turn the water reservoir upside
down and empty water from the
opening.

Kärcher RCV 5 Specifications

General

Product type	Accessory kit
Brand compatibility	Kärcher
Suitable for vacuum cleaner type	Robot vacuum
Number of pads	1
Number of brushes	3
Number of filters	2 pc(s)
Quantity per pack	6 pc(s)
Package weight	400 g

Weight and Dimensions

Depth	190 mm
Width	125 mm
Height	82 mm
Weight	100 g