Kärcher RCV 5 User Manual

English 25
The cleaning ro-
bot does not start
Ambient temperature is be-
low 32 °F (0 °C) or above
95 °F (35 °C).
1. Use the cleaning robot at tem-
peratures above 32 °F (0 °C)
and below 95 °F (35 °C).
Charging state is too low. 1. Charge the cleaning robot.
Laser distance sensor (Li-
DAR) is blocked.
1. Clean the laser distance sen-
sor with a dry cloth.
2. Remove obstacles blocking
the laser distance sensor.
3. Move the cleaning robot to
another location and start it.
Collision sensor is dirty or
too close to the virtual wall.
1. Remove foreign objects by
carefully tapping on the colli-
sion sensor.
2. Move the cleaning robot to
another location and start it.
Fall sensors are dirty. 1. Clean the fall sensors with a
dry cloth.
Water reservoir or dust con-
tainer is not or incorrectly in-
stalled.
1. Ensure that the reservoir and/
or the dust container is in-
stalled and correctly engaged,
see chapter Installing the wa-
ter reservoir. Installing the
dust container
Filter not installed or incor-
rectly installed.
1. Make sure that the filter is cor-
rectly installed.
Filter dirty. 1. Clean the filter, see chapter
Cleaning the filter.
2. If the error persists, replace
the filter, see chapter Replac-
ing the filter.
Wiper cloth or wiper cloth
holder not or incorrectly in-
stalled.
1. Ensure that the wiper cloth
and wiper cloth holder are
correctly installed, see chap-
ter Installing the wiper cloth or
Installing the wiper cloth hold-
er.
The cleaning robot is
jammed or stuck.
1. Remove obstacles.
The cleaning robot or one of
its wheels has no floor con-
tact.
1. Place the cleaning robot on a
flat surface.
Error Cause Rectification

Kärcher RCV 5 Specifications

General

Product type	Accessory kit
Brand compatibility	Kärcher
Suitable for vacuum cleaner type	Robot vacuum
Number of pads	1
Number of brushes	3
Number of filters	2 pc(s)
Quantity per pack	6 pc(s)
Package weight	400 g

Weight and Dimensions

Depth	190 mm
Width	125 mm
Height	82 mm
Weight	100 g