EasyManua.ls Logo

Kärcher SP 2 Flat - Page 19

Kärcher SP 2 Flat
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
– 2
to transport or fasten the ap-
pliance.
To separate the machine
from the mains, pull the plug
and not the power cord.
Do not scrape the power cord
across sharp edges and en-
sure that it does not get
pressed.
The voltage indicated on the
type plate must correspond to
the voltage of the electrical
source.
To avoid risks, all repairs and
replacement of spare parts
may only be carried out by the
authorised customer service
personnel.
Use electrical safety equip-
ment:
When pumping out swimming
pools, garden ponds and
fountains, only using a earth-
leakage circuit breaker with a
nominal leakage current of
max. 30 mA with the immer-
sion pump. Do not operate
the pump if there are persons
located in the swimming pool
or the garden pond.
For safety reasons, we rec-
ommend that you operate the
appliance only via a earth-
leakage circuit breaker (max.
30 mA).
In Austria pumps to be used
in swimming pools and gar-
den ponds should be
equipped with a fixed connec-
tion line according to ÖVE B/
EN 60555 Part 1 to 3; power
supply should be via a ÖVE-
tested isolating transformer
whereby the secondary nom-
inal voltage should not ex-
ceed 230V.
This device is not intended for
use by persons (including
children) with reduced physi-
cal, sensory or mental abili-
ties or lacking experience
and/or knowledge, unless
they are supervised by a per-
son responsible for their safe-
ty or are instructed by these
persons on the use of the de-
vice. Children should be su-
pervised, to ensure that they
do not play with the device.
19EN

Related product manuals