25
Connectivity
Ensure the Connectivity Indicator is lit on the hob control panel.
A
USING THE CONNECTIVITY FUNCTION
A
STOPPING THE CONNECTIVITY FUNCTION
IMPORTANT: The extraction rate of the hood will vary based upon
the total power output selected on the hob, as shown in the table
below. Each hob cooking zone has a maximum rated output of 10
comprising 1-9 and Boost (10).
If the hood controls are manually overridden when the hob and hood are linked, the hood
will operate for 5 minutes on this manual setting before returning to control by the hob.
Speed Level of the Hood Combined Power Output of the Hob
Speed 1 This speed will be selected when the combined output is 5 or less.
Speed 2
This speed will be selected when all four cooking zones are in use,
and the combined output is between 6 and 10.
Speed 3
This speed will be selected when all four cooking zones are in use,
and the combined output is between 11 and 15.
Speed 4
This speed will be selected when all four cooking zones are in use,
and the combined output is between 16 and 21.
Speed 5
This speed will be selected when all four cooking zones are in use,
and the combined output is between 22 and 27.
Speed P – Boost
This speed will be selected when all four cooking zones are in use,
and the combined output is greater than 27.
Touch the connectivity key on the hob, the indicator light will go out and the link will
be dropped. To reconnect again, press the connectivity key on the hob again.
To Next Page