KAS Neo User Manual

1
Neo Bluetooth Password Lock Manual
SAFETY AND INSTALLATION
PREFACE
1. Electronic locks are sensitive and advanced products with fragile micro-chips and hardware. Please be
aware that the position and type of environment the lock is installed in can affect its lifespan.
2. To install the lock, we recommend professional carpenters or builders. Incorrect installation of the lock
can lead to irreparable damage and void of warranty.
3. After the lock is installed, please change the default management pin code immediately and keep a record
of your new code.
4. Keep the backup mechanical keys in a safe secure location which can be conveniently accessed if required.
5. A low voltage alarm will sound when the 4 x AA batteries need replacing.
6. Make sure the batteries are in the correct positive/negative terminals. Incorrect positioning of the
batteries may short circuit and permanently damage the lock.
7. Please read the manual carefully before use, and operate the lock in accordance with instructions.
8. User data will be retain if batteries are temporarily removed.
9. Low voltage warning will sound after each unlock if battery voltage is below 4.8V.
10. Disclaimer: Figures and characters in this manual are for manual demonstration and may not reflect the
exact type or style of each model. We reserve the right to display any product that best demonstrates the
manual content.
HANDLE DIRECTION
1. Determine your door opening direction from the image below.
2. Use this direction to set the handle direction on the lock.
LEFT HANDLE
RIGHT HANDLE

KAS Neo Specifications

General

Material	Zinc Alloy
Connectivity	Bluetooth 4.0
Power Supply	Battery
Battery Type	AA Alkaline Batteries
Battery Life	Up to 1 year
Unlocking Method	Keypad, Key

Summary

Safety and Installation

Preface

General safety instructions and precautions for electronic locks, including installation advice and battery handling.

Handle Direction

Instructions on determining and setting the correct handle direction for the door lock based on opening type.

Handle Reversal Procedures

Rear Handle Direction

Steps to reverse the handle direction for the rear of the lock, involving a small key and tab manipulation.

Front Handle Direction

Steps to reverse the handle direction for the front of the lock, using a tool to shift the tab.

Assembly and Override

Square Spindle Assembly

Instructions for assembling the square spindle into the front handle, securing it with a split pin and ensuring correct arrow symbol orientation.

Mechanical Key Override

Procedure to override the lock using the mechanical key, including inserting the key and turning it to retract the latch.

User Guide and Programming

Set Electronic Key

Details about default passwords, card capacity, and how to enter the managing mode for the electronic lock.

Set Management Code

Instructions for setting a 6-digit management code, emphasizing security and its role in programming other user codes.

Program User Code

Steps to program a 4-6 digit user code for unlocking the door, noting it overrides previous codes.

RFID Card Management

Add User RFID Card

Guide on adding RFID cards or tags for door access, requiring unique 2-digit IDs and tracking them.

Delete User Card by Swipe Tag

Procedure to delete an RFID tag by simply swiping it, revoking its door access.

Delete User Card by ID

Instructions to delete a specific user card using its assigned 2-digit ID.

Lock Operation Modes

Delete All User Cards

How to delete all RFID tags from the lock to remove all door access permissions granted by cards.

Set Standard Opening Mode

Instructions to set the lock to Standard Mode, where either a PIN or RFID grants access.

Set Dual Entry Opening Mode

Instructions to set the lock to Dual Entry Mode, requiring both RFID and PIN for access.

Enable Free Passage

How to enable and disable the free passage feature, allowing unrestricted access temporarily.

Factory Reset

Procedure to reset the lock to its factory default settings, including the management code.

Troubleshooting and Bluetooth

Keypad Lock Troubleshooting

Guidance on what to do if the keypad is locked due to incorrect programming code entries.

Set Bluetooth Function

Steps to download the app, sign in, and connect the lock to Bluetooth for smart functionality.

Share Access Key

Instructions on how to share access keys to other users via the app, managing permissions.

Advanced Sharing Options

Choose Family Key

How to share a family key as a member or admin, specifying mobile numbers and roles for access.

Choose Guest Key

How to share a guest key, allowing users to input a mobile number and set a valid time for access.