KAT multipad KTMP1 - Rear Panel Description

AUTO POWER OFF:
The digital drum will automatically turn off the power if there is no operation after 30 minutes.
Press the [SELECT +] and [SELECT -] buttons and then turn on the power to switch off the auto power
off function. It will display “oF” briey.
2.2 Rear Panel Description
9. [PHONE] Jack:
Connect to headphone.
10. [LINE OUT] Output:
Connect to external AMP.
11. [HI-HAT PEDAL] Jack:
Connect to a HI-HAT Pedal controller. (KAT KT-HC1 Pedal - Sold Seperately)
12. [KICK] Jack:
Connect to external kick trigger using 1/4 mono cable.
13. [KICK SEL] Switch:
Select the kick style, piezo or switch. (KAT Bass Drum Trigger - Sold Seperately)
14. [MIDI OUT] Jack:
Connect to other MIDI DEVICE.
15. [USB] Jack:
Connect to a computer that utilizes USB 2.0 (Note - USB 3.0 may not be compatible.)
16. [DC IN] Jack:
DC IN 9V
9
10
13
11
12
15
14
16
4