KAT multipad KTMP1 - Adjust the midi note of a pad; Assign a pad to HI-HAT pad control

3.7 Adjust the midi note of a pad
Press: [SELECT+] or [SELECT-] button to select the midi note mode, the MIDI NOTE LED will light up,
when striking a pad, the 2-Digi-LED will display the midi note number, press the [VALUE +] or [VALUE -] to
adjust the midi note number. [00~99]
The display is:
Note: the midi note will change according to the voice number.
3.8 Assign a pad to HI-HAT pad control
1. Enter HI-HAT function:
1.1 Strike a pad (PAD1-4) to be assigned.
1.2 Press [SELECT+] or [SELECT-] button to enter [ASSIGN] mode, the [ASSIGN] LED will light up;
1.3 Press [VALUE+] or [VALUE-] button to select voice number (from 1 to 48,H1,H2).
The pad will be assigned to HI-HAT pad when the voice number is H1 or H2.
The open and close sounds of the Hi-Hat can now be controlled using the KAT KT-HC1
Hi-Hat Controller Pedal. (KT-HC1 Hi-Hat Controller - Sold Seperately)
2. When many pads are assigned to HI-HAT, The HI-HAT function only responds to the last pad
that you assigned. The other pads respond to “Open Hi-HAT” when struck.
8