Kathrein 742215V01 User Manual

742215V01 Page 1 of 2
2-Port Antenna
Frequency Range
Dual Polarization
HPBW
Adjust. Electr. DT
set by hand or by optional RCU (Remote Control Unit)
1710–2200
X
65°
0°–10°
B1
B1
936.4875/e ngmn 04.18.02.01 Subject to alteration.
KATHREIN-Werke KG · Anton-Kathrein-Straße 1-3 · P.O. Box 10 04 44 · 83004 ROSENHEIM · GERMANY · Phone +49 8031 184-0 · Fax +49 8031 184-820
www.kathrein.com
2-Port Antenna 1710–2200 65° 18dBi 0°–10°T
Type No.
742215V01
Highband
B1
B1
1710–2200
Frequency Range MHz 1710 – 1880 1920 – 2200
Gain at mid Tilt dBi 17.5 18.2
Gain over all Tilts dBi 17.5 ± 0.4 18.1 ± 0.3
Horizontal Pattern:
Azimuth Beamwidth ° 68 ± 2.0 63 ± 3.4
Front-to-Back Ratio,
Total Power, ± 30°
dB > 26 > 25
Cross Polar Discrimination
at Boresight
dB > 25 > 28
Cross Polar Discrimination
over Sector
dB > 13.0 > 10.5
Azimuth Beam Squint ° 0.5 ± 1.5 0.5 ± 1.2
Azimuth Beam
Port-to-Port Tracking
dB < 1.0 < 1.0
Vertical Pattern:
Elevation Beamwidth ° 7.1 ± 0.3 6.4 ± 0.4
Electrical Downtilt
continuously adjustable
° 0.0 – 10.0
Tilt Accuracy ° < 0.2 < 0.2
First Upper Side Lobe
Suppression
dB > 21 > 20
Cross Polar Isolation dB > 30
Max. Effective Power
per Port
W 250 (at 50 °C ambient temperature)
Values based on NGMN-P-BASTA (version 9.6) requirements.

Kathrein 742215V01 Specifications

General

Brand	Kathrein
Model	742215V01
Category	Antenna
Language	English

Summary

Product Specifications

Electrical Specifications

Details electrical parameters like impedance, VSWR, return loss, and interband isolation.

Mechanical Specifications

Covers physical attributes like input connectors, wind load, dimensions, and weight.

Material and Grounding

Describes antenna material composition and grounding method.

Antenna Accessories

Optional Accessories

Lists accessories available for separate order, like clamps and downtilt kits.

Included Mounting Hardware

Details the clamp included in the scope of supply for mast mounting.

Installation and Adjustment Guide

Interface Layout

Diagram showing the antenna connector layout and interface dimensions.

Adjustment Mechanism Instructions

Explains manual and RCU-based downtilt adjustment procedures.

Feederline and RCU Installation

Guidance on installing feederline connectors and optional RCUs.

General Information and Environmental Data

Environmental Conditions and Tests

Details operating environmental conditions, tests, and ice protection.

Important Usage Notes

Highlights risks related to extraordinary operating conditions and installation practices.