Camera Pairing Add Camera （Note: You can add up to 4
cameras per baby monitor.） Delete Camera
Night Vision Mode Automatic and close are optional. When
set to "Auto", camera automatically switches the screen color
according to the light condition in the room. Note: If the night
vision mode is set to "Close", the Monitor will stick to daylight
screen color and will not change when the surrounding
environment is getting dark.
Time Setting Set the monitor system time.
Brightness Set the screen brightness.
Sleep Mode Sleep Mode: Off, 1min, 3min and 5min are optional.
Enable to automatically turn off the screen after 1min, 3min or
5min. If you select "Off", the screen will not be turned off
automatically.
Display Mode Full screen, two split-screen, three split-screen,
quad split-screen and cycle cameras.
Note: When multiple cameras are connected and set to "cycle
cameras", the monitor will cycle through the list of connected
baby monitors according to the pre-set interval.
16EN
To Next Page