Kawai CS11 - Page 6

CS11/CS8 MIDI Settings Manual
6
MIDI Settings
4 Transmit Program Change Numbers
The Transmit Program Change Numbers setting determines whether the CS11/CS8 digital piano will transmit
program change information via MIDI when the instrument’s panel buttons are pressed.

Transmit Program Change Numbers setting
Transmit PGM# Multi-timbral setting Eect of pressing panel buttons
On (default) O, On1 SOUND buttons will send PGM# shown in the left column*.
On On2 SOUND buttons will send PGM# shown in the right column*.
O O Program Change information will not be transmitted via MIDI.
* Please refer to the ‘Program Change Number List’ on page 134 of “CS11/CS8 Owner’s Manual”.
1. Selecting the Transmit Program Change Numbers setting
After entering the MIDI Settings menu (page 2):
Press the  or

buttons to select the Transmit Program Change
Numbers setting.
2. Changing the Transmit Program Change Numbers setting
Press the  or  buttons to turn the Transmit Program Change
Numbers setting on or o.
* To reset the Transmit Program Change Numbers setting to the default
setting, press the  and  buttons simultaneously.
* Any changes made to the Transmit Program Change Numbers setting
will remain until the power is turned o.
* Preferred Transmit Program Change Numbers settings can be stored
to a Registration memory for convenient recall. Please refer to CS11/
CS8 Owner’s Manual page 32 for more information.
3. Exiting the Transmit Program Change Numbers setting
Press the FUNCTION button (BACK) to exit the Transmit
Program Change Numbers setting and return to the Function
Menus screen.
 Omni mode
 Program change numbers will also be transmitted when
Multi-timbral mode is set to On1 or On2.
 When using Dual or Split mode, On/O information and sound
type settings for are transmitted as exclusive data, however
program change numbers will not be transmitted.