SPECIFICATIONS
Engine Type Forced air cooled 4-stroke,
horizontal shaft,
OHV gasoline engine
Number of Cylinder 1
Bore x Stroke 76 x 55mm ( 2.99 x 2.17in. )
Piston Displacement 249cm
3
( 15.2cu.in. )
Compression Ratio 8.4 : 1
Maximum Power 6.0kW ( 8.0Hp ) / 3600rpm
Maximum Torque 16.5N-m ( 12.2ft.lbs ) / 2500rpm
Direction of Rotation Counter-clockwise facing the
PTO shaft
Fast Idle Speed 4000rpm
Slow Idle Speed 1300rpm
Fuel Unleaded gasoline
Fuel Tank Capacity 5.3litre ( 5.6US.qt. )
Min. Fuel
322gr / kW-hr ( 240gr / Hp-hr )
Consumption Ratio
Oil
Gasoline engine oil SAE10W-30
Oil Capacity 1.1litre ( 1.2US.qt. )
Carburetor Float type with fixed main jet
*Anti-dust & anti-corrosion type
Balancing Reciprocating balancer
Ignition Flywheel magneto transistor type
Plug NGK BP5ES
*RFI plug is also available
Starter Recoil starter with
Automatic Compression Release
*Electric starter is also available
Governor Mechanical governor
Lubrication Splash with low oil shut-off system
Air Cleaner Dual element
*
Oil bath type is also available
Muffler Low tone type
*
Adjustable deflector is also
available
Lighting Coil *6V-15W or 12V-25W is also
available
Charging Coil
*
2A, 4A or 13A is also available
**Dry Weight 26.8kg ( 59.1Ibs )
**Dimension 344 x 395 x 432mm
( L x W x H ) ( 13.54 x 15.55 x 17.01in. )
FE250G 2 : 1 Cam Gear Reduction
Specifications subject to change without notice.
Note : ** Recoil starter and metric straight PTO Shaft.
PERFORMANCE CURVES
OVER HEAD VALVE
CAST - IRON CYLINDER LINER
RECIPROCATING BALANCER
To Next Page
Need help?
General