Kaysun Prodigy Pro Series - User Manual

IMPORTANT NOTE:
Read this manual carefully before installing or operating your new air conditioning
unit. Make sure to save this manual for future reference. Please check the applicable
models, technical data, F-GAS (if any) and manufacturer information from the
"Owner's Manual - Product Fiche" in the packaging of the outdoor unit.
(European Union products only)
AKAY-P 26 DR9
AKAY-P 35 DR9
AKAY-P 52 DR9 AKAY-P 71 DR9
Prodigy Pro Series
INSTALLATION & OWNER'S
MANUAL

Summary

General Safety Precautions

Product Use Warnings

General safety warnings for operating the air conditioner.

Cleaning and Maintenance Safety

Cautions for Cleaning and Maintenance

Cautions related to cleaning and maintenance procedures.

Electrical Safety Warnings

Fuse Specifications

Information regarding fuse specifications for overcurrent protection.

Product Installation Safety

Note on Fluorinated Gases

Information and precautions regarding fluorinated greenhouse gases.

R32 Refrigerant Safety Warning

European Disposal Guidelines

Guidelines for proper disposal of electrical and electronic equipment.

Unit Specifications and Features

Indoor Unit Display Information

Details about the display window and its codes on the indoor unit.

Display Code Meanings

Explanation of various codes displayed on the unit.

Operating Temperature Ranges

Inverter Split Type Temperature Limits

Temperature ranges for COOL, HEAT, and DRY modes.

Performance Optimization Tips

Tips to improve unit performance by managing usage.

Other Unit Features

Auto-Restart and Anti-mildew Functions

Auto-restart after power loss and anti-mildew function.

Wireless Control and Louver Memory

Wireless control via mobile and louver angle memory.

Advanced Features: Active Clean, Breeze Away, Leak Detection

Features like Active Clean, Breeze Away, and refrigerant leak detection.

Intelligent Eye and Sleep Operation Modes

Intelligent eye sensor and sleep mode for energy saving.

Airflow Angle Adjustment Guide

Vertical Airflow Angle Setting

How to adjust the vertical airflow direction using the remote.

Horizontal Airflow Angle Setting

Manual adjustment of horizontal airflow direction.

Manual Operation Caution

Caution about using the manual button for testing/emergency.

Care and Maintenance Procedures

Cleaning the Indoor Unit

Instructions for cleaning the indoor unit, including safety precautions.

Cleaning the Air Filter

Steps for cleaning the air filter to maintain efficiency.

Air Filter Maintenance Reminders

Cleaning and Replacement Alerts

Reminders for cleaning and replacing the air filter.

Long-Term Unit Maintenance

Pre-Season Inspection Steps

Steps for maintenance before or after long periods of non-use.

Troubleshooting Common Issues

Troubleshooting Safety Precautions

Immediate actions to take if certain conditions occur.

Common Operational Issues and Causes

Common operational issues and their possible causes.

Poor Cooling Performance Solutions

Unit Not Working or Responding

Product Accessories List

Included Accessories Details

Lists included accessories with quantities and shapes.

Connecting Pipe Assembly Specifications

Details on connecting pipe assembly, including sizes.

Magnetic Ring and Belt Information

Information on magnetic rings and belts for installation.

Indoor Unit Installation Summary

Location Selection for Indoor Unit

Guidance on choosing a suitable location for the indoor unit.

Wall Hole Preparation and Dimensions

Process of marking and determining the wall hole position.

Mounting Plate Attachment Procedure

Steps for attaching the mounting plate to the wall.

Piping, Wiring, and Drain Hose Connections

Instructions for connecting piping, wiring, and drain hose.

Final Indoor Unit Mounting Steps

Final steps for mounting the indoor unit onto the plate.

Unit Parts Identification Guide

Indoor Unit Component Identification

Identification of indoor unit parts like plate, panel, louver, filter.

Outdoor Unit Component Identification

Identification of outdoor unit components like power cable.

Control and Accessory Part Identification

Identification of remote controller and holder.

Indoor Unit Installation Procedures

Pre-Installation Checks and Preparations

Checks and preparations before installing the indoor unit.

Indoor Unit Installation Location Criteria

Criteria for selecting the proper installation location.

Prohibited Indoor Installation Locations

List of unsuitable locations for installing the unit.

Wall Hole Notes and Mounting Plate Attachment

Notes on wall holes and steps for attaching the mounting plate.

Drilling Wall Hole and Mounting Plates

Wall Hole Drilling Procedure

Instructions on drilling the wall hole for piping.

Mounting Plate Dimensions and Types

Dimensions and diagrams for different mounting plates.

Refrigerant Piping Preparation Steps

Piping Angle Considerations

Explains the four possible exit angles for refrigerant piping.

Piping Connection Notes

Notes on using conduit tubes and drain hose placement.

Refrigerant Piping Damage Caution

Cautionary advice to avoid damaging refrigerant piping.

Refrigerant Piping Installation Steps

Piping Exit for Non-Embedded Walls

Steps for preparing piping when it's not embedded in the wall.

Insulating Sleeve Cutting Instructions

Instructions on cutting the insulating sleeve for piping.

Indoor Unit Piping Connection Guide

How to connect indoor unit piping to external pipes.

Drain Hose Connection Procedure

Drain Hose Placement Best Practices

Critical notes and figures for correct drain hose placement.

Electrical Work Safety Regulations

Power Off Warning Before Electrical Work

Warning to turn off main power before any electrical work.

Signal and Power Cable Connection

Wiring Diagram Compliance and Safety Warning

Warning about wiring strictly following the diagram.

Choosing Correct Cable Size

How to select the appropriate cable size based on unit specifications.

Cable Wrapping and Unit Mounting

Signal Cable Handling and Wiring

Warning against mixing signal cables with other wiring.

Piping End Preparation for Leak Testing

Instruction to keep piping ends unwrapped for leak testing.

Final Indoor Unit Mounting Procedure

Steps for mounting the indoor unit onto the wall plate.

Outdoor Unit Installation Guide

Outdoor Unit Location Selection

Guidelines for selecting the optimal location for the outdoor unit.

Prohibited Outdoor Installation Locations

List of locations to avoid for outdoor unit installation.

Extreme Weather Installation Considerations

Advice for installing the unit in areas with extreme weather conditions.

Outdoor Unit Drain Joint Installation

Cold Climate Drain Hose Installation

Important considerations for drain hose placement in cold climates.

Outdoor Unit Anchoring and Mounting

Unit Mounting Dimensions and Layout

Dimensions and relationships for mounting the outdoor unit.

Outdoor Unit Mounting Dimensions Details

Ground or Platform Installation Procedures

Procedures for ground or platform installation.

Wall Bracket Installation Procedures

Procedures for wall-mounted bracket installation.

Wall Mounting Strength Caution

Caution for wall mounting, ensuring wall strength.

Outdoor Unit Signal and Power Cable Connection

Wiring Compliance and Safety Procedures

Warning about wiring compliance and safety procedures.

Cable Size Selection Guidance

How to select the appropriate cable size based on unit specifications.

Live Wire Handling Precautions

Important considerations when crimping wires for live connections.

Refrigerant Piping Connection Guide

Pipe Length Impact on Performance

Impact of pipe length on performance and efficiency.

Pipe Cutting Procedure

Instructions for cutting refrigerant pipes accurately.

Pipe Cutting Damage Warning

Caution against deforming pipes during cutting.

Refrigerant Piping Maintenance Steps

Burr Removal from Pipes

Instructions for removing burrs from cut pipe ends.

Pipe Flaring Procedure

Steps for properly flaring pipe ends for an airtight seal.

Indoor Piping Connection Guide

Steps for connecting refrigerant piping to the indoor unit.

Refrigerant Piping Connection Torque

Torque Requirements for Flare Nuts

Table specifying torque values for flare nut tightening.

Outdoor Piping Connection Guide

Steps for connecting refrigerant piping to the outdoor unit.

Oil Trap Installation Guidance

Indoor Unit Higher than Outdoor Unit Oil Trap

Guidance on installing oil traps for vertical piping when indoor is higher.

Outdoor Unit Higher than Indoor Unit Oil Trap

Guidance on oil return and traps when outdoor is higher.

Air Evacuation Procedure

Evacuation Preparations and Precautions

Precautions and necessary checks before performing air evacuation.

Step-by-Step Evacuation Instructions

Step-by-step guide for evacuating the refrigerant circuit.

Valve Stem Operation Caution

Cautionary note on gently opening valve stems.

Adding Refrigerant Procedure

Refrigerant Quantity Calculation Formula

Formula and table for calculating additional refrigerant charge.

Refrigerant Mixing Warning

Caution against mixing different types of refrigerant.

Electrical and Gas Leak Checks

Pre-Test Run Electrical Checks

Checks to perform before starting the test run.

Electrical Safety Verification

Verifying electrical wiring safety and compliance.

Gas Leak Detection Methods

Methods for checking gas leaks at connection points.

Electrical Work Safety Warning

Critical warning about electrical work and compliance.

Test Run Procedure

Test Run Instructions and Checks

Step-by-step instructions for performing the test run.

Double-Checking Pipe Connections During Test

Importance of re-checking pipe connections during the test run.

Testing in Low Ambient Temperatures

Special procedure for testing COOL function in low temperatures.

Kaysun Prodigy Pro Series Specifications

General

Brand	Kaysun
Model	Prodigy Pro Series
Category	Air Conditioner
Language	English