KaZAM blinki - Testing Stem and Handlebar Tightness; Care & Cleaning Instructions

11
Testing Stem and Handlebar Tightness
To test the tightness of the handlebar/stem:
Straddle the front wheel between your legs.
Aempt to turn the front wheel by turning the handlebar.
If the handlebar and stem turn without turning the front wheel,
realign the stem with the wheel and ghten the stem bolt ghter
than before (approximately 1/2 revoluon only at a me).
Repeat this test unl the handlebar and stem do not turn without
turning the front wheel.
WARNING: Do not exceed 222.6 Nm of Force.
Care & Cleaning Instructions
Please clean your bike using only soap and water.
WARNING: Polycarbonate is a plasc material and should not be put
in contact with some common chemicals including:
Gasoline
Kerosene
Brake Fluid
Lacquer/Thinners
Locte
Acetone
Ammonia
Benzene
ECT.