12
Light Insert Installation
WARNING: Some models of this bicycle utilize flashing lights. Certain
people may experience epileptic seizures when viewing flashing lights or
patterns. If your child has an epileptic condition please consult your
physician BEFORE using our bicycle.
1. Insert three AAA batteries into Front Battery Tray (14)
2. Insert Front Battery Tray (14) into Front Light Insert (11)
3. Place silicone gasket (12) over the front insert slot in frame.
4. Insert Front Light Insert into slot. (fig 01)
5. Securely fasten with supplied screws.
Fig 04
NOTE: Only tighten lightly, to avoid damaging the thread in the frame.
To Next Page
Loading...
