KB Genesis KBAC-45 User Manual

Name: KB Genesis KBAC-45
Brand: KB Genesis
Rating: 5 (1 reviews)

35 pages

To Previous Page

– Notes –

Table of Contents2
Quick-Start Instructions4
Quick-Start Connection Diagram4
Safety Warning6
Introduction6
Jumper Selectable Features8
Optional Accessories9
KBAC-24D Control Layout10
KBAC-27D, 29, 29 (1P), 45, 48 Control Layout11
KBAC-217, 416 Series Control Layout12
General Performance Specifications13
Electrical Ratings14
Model KBAC-24D Mechanical Specifications15
Models KBAC-27D, 29, 29 (1P), 45, 48 Mechanical Specifications16
KBAC-217, 416 Series Mechanical Specifications17
Important Application Information18
Maximum Allowed Motor Torque Vs. Speed18
Open Ventilated Motor with External Fan Cooling18
Wiring Instructions19
Terminal Block Wiring Information19
Models KBAC-24D, 27D, 29 (1P), AC Line Input, Motor, and Ground Connections20
Models KBAC-29, 45, 48 AC Line Input, Motor, and Ground Connections20
KBAC-217, 416 Series AC Line Input, Motor, and Ground Connections20
Remote Main Speed Potentiometer Connection21
Remote Start/Stop Switch Connection with Normally Open Stop Contact21
Remote Start/Stop Switch Connection with Normally Closed Stop Contact21
Start/Stop Function Eliminated22
Voltage Following Connections22
Enable Circuit Connection22
Setting Selectable Jumpers23
Drive Operating Condition and Run/Fault Relay Contact Status23
Run/Fault Relay Output Contacts Connection23
Models KBAC-24D, 27D AC Line Input Voltage Selection (Jumper J1)23
Removing Jumper J1 on Models KBAC-24D, 27D23
60 Hz and 50 Hz Motor Selection (Jumpers J4 and J5)24
Available Torque Vs. Output Frequency24
Motor Horsepower Selection (Jumper J2)24
Automatic Ride-Through or Manual Restart Selection (Jumper J3)24
29 "Run" or "Fault" Output Relay Operation Selection (Jumper J8)25
120 Hz and 100 Hz Drive Output Frequency Selection25
Fixed or Adjustable Boost Selection (Jumper J6)25
Regenerative or DC Injection Braking Selection (Jumper J7)25
Normally Open or Closed Stop Contact Selection (Jumper J9)25
Constant or Variable Torque Selection (Jumper J10)25
Mounting Instructions26
Recommended High Voltage Dielectric Withstand Testing (Hi-Pot Testing)26
Switching Frequency and GFCI Selection (Jumper J12)26
Reconditioning the Bus Capacitors26
Typical Hi-Pot Test Setup27
10 Drive Operation28
AC Line Fusing28
Diagnostic Leds28
Trimpot Adjustments29
Drive Operating Condition and Status LED Indicator29
Minimum Speed Trimpot (MIN) Range30
Maximum Speed Trimpot (MAX) Range30
Acceleration Trimpot (ACCEL) Range30
Deceleration Trimpot (DEC/I) Range30
DC Injection Brake Trimpot (DEC/I) Range30
Slip Compensation Trimpot (COMP) Range30
Current Limit Trimpot (CL) Range30
Trip Time Vs. Motor Current31
Boost Trimpot (BOOST) Range31
Jog Trimpot (JOG) Range Run-Stop-Jog Switch Connection32
Run-Stop-Jog Switch Connection32
Appendix A - Optional SIAC-PS Signal Isolator with Power Supply33

Questions and Answers:

Need help?

Do you have a question about the KB Genesis KBAC-45 and is the answer not in the manual?

KB Genesis KBAC-45 Specifications

General

Brand	KB Genesis
Model	KBAC-45
Category	DC Drives
Language	English

Related product manuals

KB Genesis KBAC-27D

35 pages

KB Genesis KBAC Series

35 pages

KB Genesis KBAC-45 User Manual

Table of Contents

Questions and Answers:

KB Genesis KBAC-45 Specifications

Related product manuals