KB REVO E3 - Battery Information; Battery Warning

BATTERY INFORMATION CHARGING YOUR E-SCOOTER OR BATTERY UNIT
07 - ENG 08 - ENG
• Donotattempttomodify,change,or
replace your battery.
• Do not use your E-Scooter if the battery
beginstoemitodor,overheats,or
begins to leak.
• Donottouchanyleakingmaterials,or
inhale fumes emitted.
• Do not allow children and animals to
touch the battery.
• The battery contains dangerous
substances,donotopenthebattery,or
insert anything into the battery.
• Please only use the charger provided
with the E-Scooter.
• Do not attempt to charge the E-Scooter
if the battery has discharged or emitted
anysubstances.Inthatcase,thebattery
should be abandoned for safety.
You can choose to either charge your
battery while in the E-Scooter or remove
your battery from the E-Scooter to charge
in another location.
Step 1: Ensure that the charging port is
clean and dry.
Step 2: Plug the charger into the power
socket,thenconnectthecablewiththe
powersupply(100V240V;50,60Hz),make
sure the light on the charger lights up.
Charging your E-Scooter
Step 3: Put the DC connector plug into the
charging port of the E-Scooter or Battery
Unit. The indicator light on the charger
shouldchangetoRED,indicatingthatyour
E-Scooter is now being charged. When the
RED indicator light on your charger turns
to GREEN then your E-Scooter or Battery
Unit is fully charged. A full charge typically
occurs within 3 hours.
Charging your Battery Unit
Step 4: Please unplug the charger from
your E-Scooter or battery and from
thepoweroutletwhenyouarenished
charging.
• Pleasefollowalllocal,stateandfederal
lawsinregardstorecycling,handling
anddisposingofLithiumIonbatteries.
• The E-Scooter should only be shipped
in its original packaging.
• Do not throw away your box as you
will need your E-Scooter packaging for
future use.
Battery
Interface
Charging
Port