Need help?Do you have a question about the Keba KeContact KC-S10 and is the answer not in the manual?
General| Model | KeContact KC-S10 |
|---|---|
| Category | Switch |
| Rated Current | 16 A |
| Max Output Current | 16 A |
| Connector Type | Type 2 |
| Protection Class | IP54 |
| Operating Temperature | -25 °C to +50 °C |
| Cable Length | 5 m |
| Rated Voltage | 230 V |
| Input Voltage | 230 V |
| Output Voltage | 230 V |
| Communication | Modbus TCP |
Explains symbols used for warnings and hazards in the manual.
Describes the scope of the manual, which is the installation of KC-S10.
Lists the required knowledge and abilities for the target audience, such as electricians.
Details the device's purpose and operational context with KEBA charging stations.
Explains the manual's importance, retention, and adherence to instructions, including content scope.
Provides links and designations for further manuals and information available online.
Details critical safety precautions for installation, maintenance, and operation.
Provides warnings about cleaning and handling to prevent property damage.
Lists the materials included with the KC-S10 device, such as cable glands and covers.
Illustrates the system overview, showing the KC-S10, energy meter, and charging station.
Details the components and labels visible on the front of the KC-S10 device.
Details the components and labels visible on the rear of the KC-S10 device.
Details the components and labels visible on the side of the KC-S10 device.
Details the components and labels visible on the top of the KC-S10 device.
Explains the location and purpose of the device's type plate.
Shows an example of the device's type plate and labels its various components.
Provides critical safety warnings for installation, especially on hollow walls.
Advises on environmental conditions and handling to prevent moisture damage and housing breakage.
Outlines general requirements for choosing a suitable installation location.
Specifies the necessary clearances around the device for proper installation.
Lists the tools required for the installation process.
Provides step-by-step instructions for securely mounting the device on the wall.
Lists the tools required for the electrical installation and wiring process.
Explains hardwiring to domestic installation, cable routing, and connection points.
Illustrates how the device is connected using phases, neutral, and ground conductors.
Provides critical safety warnings for wiring supply lines and presents the electrical circuit diagram.
Shows a detailed diagram of the internal wiring connections within the device.
Specifies the required settings for DIP switches on the charging station.
Details the configuration steps required in the charging station's web interface.
Outlines the essential safety checks that must be performed before the device is commissioned.
Directs users to the manufacturer's website for troubleshooting information and contact details.
Provides warnings and guidelines for the proper disposal of electric and electronic devices.
Lists general technical specifications like protection class, degree of soiling, and voltage.
Details the device's nominal supply voltage, current, frequency, and consumption.
Describes terminal interfaces and specifies the environmental conditions for operation and storage.
Lists construction materials, housing details, seals, and flame retardance.
Provides the physical dimensions (height, width, depth) and weight of the device.
Lists standards checked for conformity with the EMC Directive.
Lists relevant EU directives and standards applicable to the product.
Identifies the authorised representative for UKCA marking and technical files.
States that the product's declaration of conformity is available upon request from KEBA.
Provides a template with precise dimensions for drilling mounting holes on the wall.
To Next Page