KeTop - Specific Operating Instructions KeTop T50VGA
100 User's Manual, Version: 1.3
© KEBA 2007
8.3 Installation of Programs
Programs can be only installed in the IPSM (Intel Persistent Storage Man-
ager) directory. Since only this directory is stored in the flash, data installed
in another way will get lost after turning off the KeTop.
Installation data entered in the registry can be saved with the command
„\Windwos\RegistryBackup.exe“.
Infomation
• System files, which are copied to the directory \windows while
installation, do not remain durably stored. For this reason these files
must be copied manually into the directory \IPSM\windows (if
necessary, this directory must be created by the user). With a restart of
Windows CE these files are copied automatically into the directory
\windows. So, these files are again available for the operating system
and are again present also after a restart.
8.4 Saving Files
Files must be saved in the IPSM directory. The contents of other directories
are not saved when the device is turned off.
To Next Page
Loading...