Keba KeTop T50VGA - Numbering of Leds at Robotik Keypad

Membrane Keypad KeTop T50VGA
48 User's Manual, Version: 1.3
© KEBA 2007
181 0xB5 - velocity decrease
182 0xB6 - velocity increase
5.3 Numbering of LEDs at Robotik Keypad
This chapter describes the numbering of the keyboard LEDs and push-
button LEDs.
The LED number is needed for activating the LED.
A LED can be activated in two ways:
z Via KeTop API design
(see chapter „LED Functions -> KtpSetKeyboardLed“ on page 60)
z Via KVC – KEBA Virtual Channel
(see chapter „Example: Interface on Server“ on page 84)
Standard Ke
ypad
F1
F2
F3
F4
F5
F6
F7
F8 F9 F10
1
3
5
7
9
+/-
Esc
2
4
6
8
0
. ,
Illuminated push button
LED no. = 6
RUN-LED, green
LED no. = 3
Error-LED, red
LED no. = 4
Numbering of LEDs of standard keypad