Technical Data KeTop T50VGA
136 User's Manual, Version: 1.3
© KEBA 2007
Key switch: 2 or 3 positions: – internal connec-
tion
Processor and interfaces
Processor: Intel PXA 270 / 416 MHz (XScale architecture)
Memory: Standard: SDRAM: 32 MB, FLASH: 16 MB
Maximum: SDRAM: 256 MB, FLASH: 128 MB
Interfaces: RS-232-C or RS-422-A
RS-232-C (debug interface in device)
USB host / USB client
Operating system: Windows CE 5.0
E-Stop ratings
rated voltage 24 V DC
min. current 10 mA
(each contact)
max current 1000 mA (each contact)
utilization category DC-13 (in accordance with IEC 60947-5-1)
Enabling device ratings
output type Solid-state output
rated voltage 24 V DC
(voltage tolerance 19.2 V DC to 30 V DC
according to EN 61131-2)
rated current 500 mA (max.)
max current up to output cut-off
circuit 1 1.5 A
circuit 2 0.8 A
max inductive load
circuit 1 145mJ / 1.16 H @ 24 V DC, 500 mA
(compareable with DC13 according to EN 60947-5-1)
circuit 2
145mJ / 1.16 H @ 24 V DC, 500 mA
(compareable with DC13 according to EN 60947-5-1)
reverse polarity protection
circuit 1 yes
circuit 2 yes
short circuit and overload protection
circuit 1 yes (by integration in output-FET)
circuit 2 yes (by protective circuit)
operating cycle
2
nd
position 10
5
3
rd
position 5 x 10
4
actuating force
from 1
st
position to 2
nd
position 5 N typically
from 2
nd
position to 3
rd
position 20 N typically
Accessories
Wall bracket For stationary operation or storage of the KeTop.
KeTop WB090: Wall bracket without cable suspension.
KeTop WB095: Wall bracket with cable suspension.
KeTop WB100: Wall bracket with height adjustment and without
cable suspension.
KeTop WB110:
Wall bracket with height adjustment and with
cable suspension.
Connection cable
Resistent to twisting, bending and foot traffic,with
20-pin push pull
To Next Page
Loading...