Software KeTop T50VGA
76 User's Manual, Version: 1.3
© KEBA 2007
In case the network name is to be used in place of the IP-Address, then
resolution of the name must be ensured either via the DNS-server or by an
entry in the file “hosts.ini.”
Information
The “Input panel” in this case must be enabled on the KeTop, as access to
this feature is blocked during the logging process:
3) Click the button “Connect” to establish connection with the destination
computer.
Clicking the “Cancel” button disrupts the connection set up.
Once the connection has been established, the login window of the destina-
tion computer is displayed with a trapezoidal title bar that is treated as an
identifier of the RDP-Connection.
To Next Page
Loading...