Software KeTop T50VGA
92 User's Manual, Version: 1.3
© KEBA 2007
7.10.2 Data connection via USB client
The data connection from the KeTop to the PC is established as follows:
1) Remove the cover of the cable entrance area on the KeTop.
2) Start the ActiveSync software on the PC
a) delete existing partnerships ('File' -> 'Delete Partnership')
b) activate USB connection ('(x) Allow USB connections <OK>’)
3) Connect USB cable (Mini-B) to KeTop and PC.
When the KeTop was recognized as USB device, the connection will
be established automatically.
4) At the PC:
- Connect KeTop as a "Guest' (Set Up a Partnership -> No).
z The ActiveSync software at KeTop starts automatically when using the
USB connection.
To Next Page
Loading...