Need help?Do you have a question about the KEF REFERENCE 1 and is the answer not in the manual?
Follow manual, clean with dry cloth, avoid damp/extremes/sunlight, and secure all cables.
Guide for configuring a single wire connection for speakers.
Guide for configuring a bi-wired connection for speakers.
Instructions on how to make single wire connections to the speakers.
Instructions on how to make bi-wired connections to the speakers.
Instructions on how to make bi-amplified connections to the speakers.
Follow manual, clean with dry cloth, avoid damp/extremes/sunlight, and secure all cables.
Guide for configuring a single wire connection for speakers.
Guide for configuring a bi-wired connection for speakers.
Instructions on how to make single wire connections to the speakers.
Instructions on how to make bi-wired connections to the speakers.
Instructions on how to make bi-amplified connections to the speakers.
General| Design | Three-way bass reflex |
|---|---|
| Frequency Response | 45Hz - 35kHz (±3dB) |
| Amplifier Requirements | 50 - 200W |
| Sensitivity | 85dB (2.83V/1m) |
| Maximum Output | 110dB |
| Nominal Impedance | 8Ω (min. 3.2Ω) |
| Weight | 18.2kg (40.1 lbs) |
| Drive Units | Uni-Q driver array: HF: 25mm (1in.) vented aluminium dome, MF: 125mm (5in.) aluminium, Bass units: LF: 165mm (6.5in.) aluminium |
| Crossover Frequencies | 2.8kHz |
| Finishes | Satin Walnut, Blue Ice White |
To Next Page
