Keiser M SERIES Calibration Instruction

CALIBRATING YOUR KEISER M SERIES EQUIPMENT
Procedure for software version U406 and above
STEP 7
STEP 8
STEP 9
555512_D
6X
1 ROTATION ONLY
Until the computer shows 0:01 in the time row
Slide the calibration tool
from the magnet housing.
Remove the calibration
tool from the flywheel.
Rotate the pedal, no more
than one turn, until the
computer shows 0:01 in the
time row, continue turning
for one-half revolution
then stop the crank arm.
Once you see 0:01 appear
on the display, twist and
release the magnet housing
6 times. The magnet
housing must rotate from
stop to stop.

Keiser M SERIES Specifications

General

Brand	Keiser
Model	M SERIES
Category	Fitness Equipment
Language	English