Need help?Do you have a question about the Keiser 300 and is the answer not in the manual?
General| Resistance System | Magnetic |
|---|---|
| Adjustable Handlebars | Yes |
| Display | LCD |
| Type | Indoor Exercise Bike |
| Adjustable Seat | Yes |
| Heart Rate Monitor | Yes |
| Drive System | Belt |
| Metrics Displayed | Time, RPM, Watts, Heart Rate, Calories, Distance |
Explains the use of the word CAUTION for bodily injury warnings.
Explains the use of the word NOTICE for machine damage warnings.
Guides through fixing lack of resistance or uneven exercise feel.
Explains how to find and fix air leaks in hoses and fittings.
Explains filter role and daily moisture removal.
Warns about cracked bowls and details cleaning procedures.
Details cleaning and lubricating internal valve parts.
Steps for servicing the brass valve cartridge.
Procedures for removing cylinders and checking bearings.
Steps to remount cylinder, reattach hose, and check leaks.
Emphasizes avoiding damage to cylinder rods and bores.
Details cleaning internal parts and applying grease.
Caution against damaging tubes by over-tightening bolts.
Steps to remove spring pins using a drift punch.
Instructions for correctly installing new spring pins.
Steps to remove the shaft covering and pin.
Steps to reinsert shaft, pin, sleeve, and cap.
Detailed steps for removing the T-88 bearing assembly.
Steps for correctly installing the T-88 bearing assembly.
How to adjust bearings to eliminate arm side-play.
Guides on applying alcohol and fitting new grips.
Steps for removing old decals and applying new ones.
Warnings about sharp edges and careful use of solvents.
Adjusting cylinders and stops for smooth arm lock engagement.
Safety warning about lifting heavy weights.
Adjusting cylinder rods for clearance and arm lock.
Ensuring arm lock works smoothly across resistances.
Adjusting cylinder rods for arm lock smoothness.
Adjusting cylinder for smooth arm lock function.
Weekly inspection of the cable and pulleys.
To Next Page
