Keithley 2260B Series User Manual

REMOTE CONTROL
85
Standard Event Status Register Group
Overview
The Standard Event Status Register Group
indicates if any errors have occurred. The bits
of the Event register are set by the error event
queue.
Bit Summary
Event Bit #
Bit
Weight
OPC (Operation complete)
The OCP bit is set when all
selected pending operations are
complete. This bit is set in
response to the *OPC command.
0 1
RQC (Request control) 1 2
QUE (Query Error)
The Query Error bit is set in
response to an error reading the
Output Queue. This can be
caused by trying to read the
Output Queue when there is no
data present.
2 4
DDE (Device Dependent Error)
Device specific error.
3 8

Keithley 2260B Series Specifications

General

Current Resolution	0.1mA
Programming Accuracy (Current)	0.1% + 5mA
Readback Accuracy (Current)	0.1% + 5mA
Operating Temperature Range	0°C to 50°C
Storage Temperature Range	-40°C to 70°C
Voltage Resolution	1mV
Remote Interface	USB, LAN, GPIB
Programming Accuracy (Voltage)	0.03% + 5 mV
Protection Features	Overvoltage protection (OVP), Overcurrent protection (OCP), Overtemperature protection (OTP)
Display	Color LCD
Dimensions	88 mm x 214 mm x 374 mm