Keithley 2260B Series User Manual

REMOTE CONTROL
93
Execution Errors
Overview
An <error/event number> in the range [ -299 , -
200 ] indicates that an error has been detected
by the instrument’s execution control block.
The occurrence of any error in this class shall
cause the execution error bit (bit 4) in the event
status register (IEEE 488.2, section 11.5.1) to be
set. One of the following events has occurred:
• A <PROGRAM DATA> element following a
header was evaluated by the device as outside
of its legal input range or is otherwise
inconsistent with the device’s capabilities.
• A valid program message could not be properly
executed due to some device condition.
Execution errors shall be reported by the device
after rounding and expression evaluation
operations have taken place. Rounding a
numeric data element, for example, shall not be
reported as an execution error. Events that
generate execution errors shall not generate
Command Errors, device-specific errors, or
Query Errors; see the other error definitions in
this section.
Error Code Description
-200 Execution
error
This is the generic syntax error for devices that
cannot detect more specific errors. This code
indicates only that an Execution Error as
defined in IEEE 488.2, 11.5.1.1.5 has occurred.

Keithley 2260B Series Specifications

General

Current Resolution	0.1mA
Programming Accuracy (Current)	0.1% + 5mA
Readback Accuracy (Current)	0.1% + 5mA
Operating Temperature Range	0°C to 50°C
Storage Temperature Range	-40°C to 70°C
Voltage Resolution	1mV
Remote Interface	USB, LAN, GPIB
Programming Accuracy (Voltage)	0.03% + 5 mV
Protection Features	Overvoltage protection (OVP), Overcurrent protection (OCP), Overtemperature protection (OTP)
Display	Color LCD
Dimensions	88 mm x 214 mm x 374 mm