To delete a row using the front panel:
1. Highlight the Points cell of the row you want to delete.
2. Press ENTER to select the cell row.
3. Navigate to Delete.
4. Press ENTER.
To execute a list sweep using the front panel:
1. Press the MENU key.
2. Under Trigger, highlight the Congure icon using either
the navigation control or the soft keys. Press ENTER.
3. Select the button next to Sample Count and press the
ENTER key.
4. Set the sample count to 10.
5. Press the HOME key.
6. Press the Next soft key twice to go to the third soft-key
area.
7. Press the List soft key. The List dialog box is displayed.
8. If the Number soft key is not showing a 1, press the
Number soft key and enter the value, 1.
9. Press the Enable soft key to run list 1.
To view the measurements on the front panel:
1. Press the Exit key to close the List dialog box.
2. Press the View soft key under Graph to view a plot of the
measurements.
To Next Page
Loading...
Need help?
General
