Keithley 2601B

Safety
Introduction
Models 2601B, 2602B, and 2604B
System SourceMeter Instruments
Quick Start Guide

Keithley 2601B Specifications

General

Model	2601B
Type	System SourceMeter Instrument
Channels	1
Maximum Voltage	40 V
Maximum Current	10A (pulsed), 3A (DC)
Voltage Resolution	100nV
Connectivity	GPIB, LAN, USB
Dimensions	8.4 in x 3.5 in
Supported Applications	device testing

Summary

Safety Precautions

General Safety Guidelines

Handling Warnings and Symbols

Explains WARNING, CAUTION headings and safety symbols.

Unpacking and Inspection

Unpacking Procedure

System Integration Safety

Test System Safety Information

Installation and Power Connection

Instrument Installation

Connecting Line Power

Power-Up and Initial Operation

Connecting Line Power Steps

Turning On the Instrument

Power-Up Sequence and Display

Observing Power-Up Sequence

Testing Basic Instrument Operation

Step 1: Set Source Function, Range, Level

Configures the voltage source parameters on the instrument.

Setting Source Parameters

Step 2: Set the Source Limit

Adjusts the current limit for the voltage source.

Measurement Configuration and Output

Step 3: Set Measurement Function and Range

Configures the instrument to measure voltage.

Steps 4 & 5: Turn Output On and Observe

Turns the output on and verifies measured voltage readings.

Test Completion

Step 6: Turning the Output Off

Safely disables the instrument's output after testing.