Keithley 7001 Quick Reference Guide

28
Table 10: ROUTe command summary
Command Description
[:ROUTe]
:CLOSe <list>
:STATe?
Close specified channels:
Read closed channels.
:CLOSe? <list> Read state of specified channels
(1=closed, 0=open).
:OPEN <list>|ALL Open specified (or all) channels.
:OPEN? <list> Read state of specified channels
(1=open, 0=closed).
:SCAN <list>
:POINts?
Specify scan list:
Read number of channels in
scan list.
:SCAN? Read scan list.
:FCHannels <list> Specifies channels that cannot
be closed (forbidden).
:FCHannels? Read forbidden channels.
:CONFigure:
:SCHannel <b>
:SCHannel?
:CPAir <b>
:CPAir?
:SLOT1
:CTYPE <type>
:CTYPE?
:POLE <n>
:POLE?
:STIMe <num>
:STIMe?
Configuration command path:
Enable (1 or ON) or disable (0
or OFF) Single Channel.
Read Single Channel mode.
Enable (1 or ON) or disable (0
or OFF) Channel Pairing.
Read Channel Pairing.
Path to configure CARD 1:
Specify card type.
Read card type.
Select pole mode (1, 2 or 4).
Read pole mode.
Set relay settling time (0 to
99999.999 sec).
Read relay settling time.

Keithley 7001 Specifications

General

Brand	Keithley
Model	7001
Category	Switch
Language	English