29
[:ROUTe]
:CONFigure:
:SLOT2
:CTYPE <type>
:CTYPE?
:POLE <n>
:POLE?
:STIMe <num>
:STIMe?
:MEMory
:SAVE M<num>
:RECall M<num>
Path to configure CARD 2:
Specify card type.
Read card type.
Select pole mode (1, 2 or 4).
Read pole mode.
Set relay settling time (0 to
99999.999 sec).
Read relay settling time.
Path to program memory:
Saves channel pattern in mem-
ory (1-100).
Recalls channel pattern from
memory (1-100).
Table 11: SENSe command summary
Command Description
:SENSe[1]
:TTL1
:DATA?
Command path for input port.
Read digital input port.
Table 10: ROUTe command summary (Cont.)
Command Description
To Next Page
Loading...
