Keithley 7001 Quick Reference Guide

36
:TRIGger
:IMMediate
:COUNt <n>|
INFinite
:AUTO ON|OFF
:COUNt?
:DELay <num>
:DELay?
:SOURce HOLD|
IMMediate|
MANual|BUS|
TLINk|EXTernal|
TIMer
:SOURce?
:SIGNal
:TIMer <num>
:TIMer?
:TCONfigure
:PROTocol
ASYNchronous|
SSYNchronous
:PROTocol?
:DIRection
SOURce|
ACCeptor
:DIRection?
:ASYNchronous
:ILINe <n>
:ILINe?
Path to program Trigger Layer
(channel layer) of scan:
Scan channels immediately.
(Loop around control
source.)
Program number of channels
(1 to 9999, or INFinite).
Enable (on) to use scan-
list-length.
Read channel count.
Program delay (0 to
99999.999 sec)
Read delay period.
Select Trigger Layer Control
Source.
Read source.
Bypass channel control
source one time only.
Set timer interval (0 to
99999.999 sec).
Read timer interval.
Path to configure Triggers:
Select protocol (asynchro-
nous or semi-synchro-
nous Trigger Link.)
Read protocol.
Enable (SOUR) or disable
(ACC) Bypass.
Read direction.
Path to configure asynchro-
nous Trigger Link mode:
Select input line (1 to 6).
Read input line.
Table 15: Trigger command summary (Cont.)
Command Description

Keithley 7001 Specifications

General

Brand	Keithley
Model	7001
Category	Switch
Language	English