What to do if my Kelvinator KSV35HRB is not cooling properly?
If your Kelvinator Air Conditioner isn't cooling well, make sure the set temperature is appropriate. Also, check if the air filter is dirty—clean it and put it back. Ensure that the outdoor unit's inlets and outlets aren't blocked and that all doors and windows are closed.
How to troubleshoot why my Kelvinator KSV35HRB Air Conditioner won't turn on?
If your Kelvinator Air Conditioner isn't starting, check if there's voltage at the plug socket. Also, inspect the plug fuse and verify that the timer isn't the reason.
Why is my Kelvinator KSV35HRB Air Conditioner remote not working?
If your Kelvinator Air Conditioner remote isn't working, remember it only works within 8 meters of the indoor unit. Check the batteries and replace them if needed. Make sure the batteries are inserted correctly, paying attention to the + and - terminals.
What should I do if water or other objects get inside my Kelvinator Air Conditioner?
Disconnect the power and contact your service center.
What to do if the Kelvinator Air Conditioner fuse blows or the circuit breaker trips often?
Disconnect the power and contact your service center.
What to do in case of other abnormal situations with my Kelvinator KSV35HRB Air Conditioner?
Disconnect the power and contact your service center.
Why doesn't my Kelvinator KSV35HRB blow air immediately in heat mode?
Your Kelvinator unit is designed not to blow cold air on HEAT mode under certain conditions: when heating has just started, during defrosting, or during low temperature heating, and if the set temperature has not been reached.
Why does my Kelvinator Air Conditioner automatically switch to Fan mode?
When the room temperature reaches the set temperature on your Kelvinator Air Conditioner, the compressor stops, and the unit switches to FAN mode. The compressor restarts when the room temperature rises in COOL mode or falls in HEAT mode, relative to the set point.
General| Type | Split System |
|---|---|
| Cooling Capacity | 3.5kW |
| Power Supply | 220-240V, 50Hz |
| Net Weight (Indoor Unit) | 9 kg |
| Power Consumption (Cooling) | 1.09 kW |
| Noise Level (Indoor) | 42 dB |
| Operating Temperature (Cooling) | 18°C to 43°C |
Essential points on installation, service, and safe operation.
Explains the meaning of safety symbols and general precautions.
Crucial steps and warnings before operating the air conditioner.
Precautions to take during the normal use of the appliance.
Safety measures related to cleaning and maintaining the unit.
Details on where to place the remote and its general features.
Instructions on how to change the batteries in the remote control.
Explains the function of each button on the remote control.
Describes the various indicators and displays on the remote.
Instructions on how to adjust the airflow direction using the remote.
How to use the automatic mode for optimal comfort and energy saving.
Step-by-step guide for cooling, heating, and fan-only modes.
Instructions for dehumidifying (drying) and energy-saving Eco modes.
Guide to setting timers for automatic on/off operations.
Instructions for setting the internal clock of the remote control.
Detailed steps for cleaning or replacing the air filter.
How to clean the exterior of the unit and other parts.
Explains common sounds that do not indicate a malfunction.
Guides on how to resolve typical problems with the air conditioner.
Details the terms and conditions of the manufacturer's warranty.
Information on how to get service or order spare parts.
Provides phone, fax, email, and website details for customer support.
To Next Page
