What to do if my Kelvinator KSV26HRB Air Conditioner is not cooling properly?
If your Kelvinator Air Conditioner isn't cooling well, make sure the set temperature is appropriate. Also, check if the air filter is dirty—clean it and put it back. Ensure that the outdoor unit's inlets and outlets aren't blocked and that all doors and windows are closed.
How to troubleshoot why my Kelvinator Air Conditioner won't turn on?
If your Kelvinator Air Conditioner isn't starting, check if there's voltage at the plug socket. Also, inspect the plug fuse and verify that the timer isn't the reason.
Why is my Kelvinator KSV26HRB Air Conditioner remote not working?
If your Kelvinator Air Conditioner remote isn't working, remember it only works within 8 meters of the indoor unit. Check the batteries and replace them if needed. Make sure the batteries are inserted correctly, paying attention to the + and - terminals.
What should I do if water or other objects get inside my Kelvinator KSV26HRB?
Disconnect the power and contact your service center.
What to do if the Kelvinator KSV26HRB fuse blows or the circuit breaker trips often?
Disconnect the power and contact your service center.
What to do in case of other abnormal situations with my Kelvinator Air Conditioner?
Disconnect the power and contact your service center.
Why doesn't my Kelvinator KSV26HRB blow air immediately in heat mode?
Your Kelvinator unit is designed not to blow cold air on HEAT mode under certain conditions: when heating has just started, during defrosting, or during low temperature heating, and if the set temperature has not been reached.
Why does my Kelvinator Air Conditioner automatically switch to Fan mode?
When the room temperature reaches the set temperature on your Kelvinator Air Conditioner, the compressor stops, and the unit switches to FAN mode. The compressor restarts when the room temperature rises in COOL mode or falls in HEAT mode, relative to the set point.
General| Cooling Capacity | 2.6 kW |
|---|---|
| Energy Efficiency Ratio (EER) | 3.21 |
| Refrigerant | R410A |
| Star Rating | 3 Star |
| Compressor Type | Rotary |
| Type | Split System |
| Power Supply | 220-240V, 50Hz |
| Power Consumption (Cooling) | 810 W |
| Operating Temperature (Cooling) | 16-32°C |
Key safety guidelines and warnings for using the appliance.
Guidelines for operating the air conditioner via the remote control.
Detailed descriptions of all buttons on the remote control.
Step-by-step guide for cleaning the air filter.
Solutions for common problems like unit not starting or poor cooling.
Detailed terms and conditions of the product warranty.
To Next Page