EasyManua.ls Logo

Kelvinator KSV26CRE - User Manual

Kelvinator KSV26CRE
24 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Inverter Split System Room Air Conditioner
User Manual
KSV26CRE, KSV26HRE, KSV35CRE, KSV35HRE,
KSV53HRE, KSV62HRE, KSV70CRE, KSV70HRE,
KSV80HRE
Refrigerant R32

Table of Contents

Other manuals for Kelvinator KSV26CRE

Preview: Installation Manual
Installation Manual28 pages

Questions and Answers

  • C
    Christy PowellJul 30, 2025
    What to do if my Kelvinator KSV26CRE Air Conditioner doesn't start?
    • L
      Lindsey MclaughlinJul 30, 2025
      If your Kelvinator Air Conditioner isn't starting, here are a few things to check: * First, make sure there isn't a power cut and wait for the power to be restored. * Ensure the unit is securely plugged into the wall receptacle. * Check the fuse and replace it if it has blown. * Have a certified electrician test the voltage if you suspect it's too high or too low. * Replace the batteries in the remote control. * Verify the timer setting is correct or cancel it.
  • B
    Barbara CaseyAug 13, 2025
    Why is my Kelvinator KSV26CRE Air Conditioner not cooling well?
    • D
      Daniel GreenAug 13, 2025
      If your Kelvinator Air Conditioner isn't cooling or heating the room effectively, even with airflow, consider the following: * Ensure the temperature is set correctly. * Clean the air filter if it's blocked. * Close any open doors or windows. * Check for and clear any obstructions from the air inlet or outlet of both the indoor and outdoor units, then restart the unit. * If the compressor's 3 minutes protection has been activated, wait for 3 minutes.

Kelvinator KSV26CRE Specifications

General IconGeneral
Cooling Capacity2.6 kW
RefrigerantR410A
Compressor TypeRotary
Power Supply220-240V, 50Hz
Weight (Indoor Unit)8 kg
TypeSplit System
Operating Temperature (Cooling)18°C to 43°C

Related product manuals