12 Operating the air conditioner Kelvinator Air Conditioning
Timer-Off Operation (Timer Stop Operation)
This function is recommended when you want the unit to be
turned off automatically (e.g. bedtime). The air conditioner
will automatically stop operating at the set time.
Example: It is 6:00 PM and you want the air conditioner to
turn off at 11:55 PM.
will flash on the display of the remote control
the very first time the operation is used. With
2 Set the desired time by pressing repeatedly or holding
down the CONTROL
display of the remote control.
3 Confirm the set time by pointing the remote control at
the indoor unit and pressing the
button again.
symbol will stay on the remote control’s display.
The Timer indicator on the display panel of indoor unit
will be illuminated.
Combined Timer
Timer-On
Timer-Off
(Off-Start-Stop operation)
This function is recommended when you want to turn the air
conditioner on before waking up and turn it off after leaving
the house.
Example: It is 10:00 PM and you want to start the air
conditioner at 6:30 AM and stop it at 9:30 AM.
2 Set the desired time by pressing repeatedly or holding
down the CONTROL
display of the remote control.
3 Confirm the set time by pointing the remote control
at the indoor unit and pressing the button
again.
4 Press the button.
5 Set the desired time by pressing repeatedly or holding
down the CONTROL
display of the remote control.
Timer-On Operation
will flash on the display of the remote control
the very first time the operation is used. With
2 Set the desired time by pressing the CONTROL
Forward Backward
Each time you press the buttons, the time will move
forward or backward by 1 minute. Holding the button
down will scroll more rapidly through the time display.
3 Point the remote control to the indoor unit, confirm the
set time by pressing the button.
symbol will stay on the remote control’s display.
Check that the Timer indicator on the display panel of
indoor unit is illuminated.
Cancelling the Settings
Point the remote control at the indoor unit and press the
on the
remote control is turned off.
tips and information
• Thetimerfunctionsetbytheremotecontroldepends
on the clock time. Check that the clock on the remote
control is set correctly in order to prevent error.
• Theeffectiveoperationtimesetbytheremotecontrol
is limited to 24 hours.
Examples of Timer Settings
Timer-On Operation (Timer Start Operation)
This function is recommended when you want the unit to
be turned on automatically before returning home. The air
conditioner will automatically start operating at the set time.
Example: It is 8:00 AM and you want the air conditioner to
start working at 6:00 PM.
1 Press the button.
2 Set the desired time by pressing repeatedly or holding
down the CONTROL
display of the remote control.
3 Confirm the set time by pointing the remote control at
the indoor unit and pressing the
button again.
symbol will stay on the remote control’s display.
The Timer indicator on the display panel of indoor unit
will be illuminated.
Timer settings
To Next Page
Loading...
Need help?
General
